Licensed & insured · NC electrical contractor
Mon–Fri 8AM–5PM · Emergency 24/7
Licensed & insured · NC electrical contractor
Mon–Fri 8AM–5PM · Emergency 24/7
Temporary power through trim-out for builders running custom homes and spec builds across eastern North Carolina. We hit the dates, we are on site with the inspector, and changes get priced the same day.
Days to rough-in
Inspections per build
Licensed & insured
Cities served
A builder does not choose a new construction electrician on craftsmanship. Craftsmanship is assumed. The choice comes down to whether the sub turns up on the day the schedule says.
East Point Electric handles new construction wiring in Fayetteville, NC for builders, general contractors and developers — custom homes, spec builds and small multi-unit projects across seven counties.
We take the whole electrical scope end to end: temporary power on day one, the service entrance and panel, every branch circuit, devices and fixtures, smoke and carbon monoxide detectors, and the final sign-off your client’s certificate of occupancy depends on. One new construction electrician, one point of contact, from the pole to the punch list.
Residential construction across Cumberland, Harnett and Wake counties has been steady for years. What has not been steady, according to most of the builders we work with, is finding a sub who treats their critical path as seriously as they do.
If a new construction wiring quote does not account for all five, something is going to arrive as a change order later.
A construction pole set, permitted and energised so framing, HVAC and every other trade has power from day one. It is the first thing a site needs and the first thing most electrical quotes forget to mention.
Load calculation for the finished house, service size agreed against the plan rather than assumed, and meter base and panel locations set with the utility before framing closes in.
After framing, before insulation. Boxes, cable and circuits in, every device location set to the plan and to code spacing. Two to four days on a standard plan, longer on larger or feature-heavy builds.
The county inspects with the walls open. Passing first time is the whole point — a failed rough-in stops insulation, which stops drywall, which moves every date behind it.
Devices, fixtures, covers, smoke and CO detectors, panel directory labelled properly, everything tested. Then final inspection and the electrical sign-off the certificate of occupancy depends on.
One to three weeks of our time spread across the build for a typical home. Rough-in is the concentrated stretch; trim-out is one to three days once the finishes are in.
Every builder budgets new construction wiring per square foot at feasibility stage. It is a useful starting number and a poor finishing one — here is what sits behind it.
The items that blow budgets late: running service from the road on a rural lot, a long underground feed, an upgrade to 200A after pricing, and EV or solar provisions added once framing is closed.
National 2026 guides put new house wiring at $4–$9 per square foot installed, with rough-in alone accounting for $2–$4 per square foot. A 1,500 square foot home lands around $6,000–$13,500; a 2,500 square foot home around $10,000–$22,500.
Permits run $200–$900, inspections $100–$200 each, and labour accounts for 60–75% of the total.
Those are national averages. We bid from your plan, not from a square-foot average — itemised, so you can compare it line for line against any other bid on your desk.
Four things, and none of them are about how neatly we staple cable.
Rough-in and trim-out happen when we said they would. If your insulation crew is booked for Monday, the walls are inspected and signed off before Monday — not on Monday afternoon while they wait in the driveway.
Unlabelled panels, blocked working clearance in front of equipment, missing GFCI protection in kitchens and wet areas, exit and emergency lighting that no longer works, and circuits added over the years with no record.
Your build does not get pushed back because a larger one came in that week. Owner-Operated crews mean the person who committed to your schedule is the person working it.
Your client moves an island or adds a bonus room. You get the number in writing that day, so the conversation with them happens before the work does, not after.
You deal with an owner, not a dispatcher and not a different foreman each week. Call the number below and ask for trade terms rather than going through the homeowner booking route.
Builders running multiple projects get trade rates and priority scheduling. We would rather hold slots for two contractors we know than chase twelve one-off jobs.
We also cover remodel wiring for renovation projects, so the same crew can handle both sides of your book.
Three decisions made at plan stage that cost very little now and a great deal later. Worth raising with your client before the drawings are final.
200 amps is the sensible default on any modern build. Electric ranges, heat pumps, hot tubs and chargers add up quickly, and a plan bid at 100A that has to be revised after framing is an avoidable cost. Larger homes with two HVAC systems and a workshop may justify 400A.
Recent code work draws a clear line between an EV-ready installation and an EV-capable one. Running the conduit and reserving the capacity at rough-in costs a fraction of retrofitting through finished walls — and on a spec home it is a selling point that costs almost nothing to advertise.
Recent NEC editions require whole-home surge protection on new dwelling services. Smoke and carbon monoxide detector layout is inspected, and getting the placement right on the drawing avoids a correction at final.
Worth pricing at plan stage too: generator transfer provisions, structured and low-voltage wiring, outdoor and landscape circuits, and a garage or workshop sub-panel. All of them are cheap while the walls are open.
We take new construction wiring in Fayetteville, NC and in fifteen more cities across Cumberland, Harnett, Lee, Wake, Sampson, Bladen and Hoke counties. Subdivision work around Fuquay-Varina and Raleigh tends to be repeatable plans on serviced lots. Rural custom builds in Bladen and Sampson counties are a different exercise, where the service run from the road is a genuine line item rather than a footnote.
TALK TO AN OWNER
Hours
National 2026 guides put it at $4 to $9 per square foot installed, so roughly $6,000 to $13,500 for a 1,500 square foot home and $10,000 to $22,500 at 2,500 square feet. We bid from the plan rather than the average, itemised so you can compare it line for line.
One to three weeks of our time spread across the build. Rough-in is two to four days on a standard plan, trim-out is one to three days once finishes are in, and the gap between them is your schedule rather than ours.
The county inspects the wiring with the walls still open: box placement, cable support, circuit count, grounding and bonding. It has to pass before insulation goes in, which is why we are on site when the inspector arrives.
Yes. We set and permit the construction pole so the site has power from day one. It is stage one of the job rather than something you arrange separately before we start.
Either way works. Some builders supply their own fixtures and we install them; others prefer us to supply everything. We set it out in the bid so there is no gap between what you assumed and what is included.
Now. Running the conduit and reserving the panel capacity at rough-in costs a fraction of retrofitting through finished walls later, and on a spec build it is a feature you can advertise for almost nothing.
Yes, on repeatable plans where we can schedule properly. Call and tell us the plan count and the timeline, and we will tell you honestly what we can commit to rather than taking it and slipping.
Send us the plan and we will come back with an itemised bid and what we can commit to. Licensed, insured and working with builders across sixteen cities in eastern North Carolina.